FPX Nickel在纽芬兰Advocate镍矿首批钻孔发现近地表高品位awaruite镍矿带，钻探规模扩至逾5000米

Vancouver, November 9, 2026 – FPX Nickel Corp. (TSX-V: FPX, OTCQX: FPOCF) (“FPX” or the “Company”) is pleased to announce positive results from the first four holes drilled along a single section at the Birchy North Target on the Advocate Nickel Property (“Advocate” or the “Property”) in Newfoundland. Given strong results to-date at both the Birchy North and Wolverine targets, the inaugural Advocate drill program has been expanded from an initially planned 4,000 metres to over 5,000 metres.

Highlights

• Birchy North Target: Significant Intercepts and Scale
  • 279.0 metres at 0.11% Davis Tube Recoverable (“DTR”) nickel including 54.0 metres at 0.14% DTR nickel from 29.0 metres downhole in hole B26-004
  • 347.5 metres at 0.10% DTR nickel including 63.0 metres at 0.13% DTR nickel from 234.0 metres in hole B26-001
  • Drill holes B26-001 through B26-004 were drilled on one section and define high-grade awaruite nickel mineralization across approximately 350 meters wide by 300 metres deep
  • Subsequent holes (B26-005 through B26-008) test Birchy North over a strike length of 1,250 metres; assays for holes B26-005 through B26-008 are pending
• Wolverine Target: Ongoing and Expanded Drilling
  • Planned drilling at the Wolverine Target has been expanded to include nine holes over a strike length of 1,800 metres
  • Five holes have been completed to-date at Wolverine; all holes show significant visible awaruite over broad intervals
• Advocate Property Expansion
  • The Company has further increased mineral tenure holdings at the Advocate Property from 210.5 km² to 237.5 km² through recent staking activities

“These results, from the first four drill holes at our Advocate Property in Newfoundland, demonstrate that Advocate can host awaruite mineralization with similar DTR nickel grades to those which define our Baptiste Deposit in British Columbia,” commented Keith Patterson FPX’s Vice President, Exploration. “The near-surface, high-grade intercept encountered in hole B26-004 (54 metres at 0.14% DTR nickel from 29 metres downhole) is a highly positive indication of the potential for this system to host high-grade awaruite mineralization over significant volumes.”

Advocate Nickel Property

The Advocate Nickel Property is located in north-central Newfoundland, approximately midway between Deer Lake and the mining town of Baie Verte (Figure 1). The 237.5 km² land package covers highly prospective, serpentinized ultramafic rocks and includes over 45 km strike length of the Advocate Complex ophiolite. Access is via a high-quality network of logging roads, generally no more than 5 to 10 km from the Trans-Canada Highway or Newfoundland Highway 410. The Property vendor currently operates a deep-sea port at Pine Cove, approximately 50 km northeast of the Property.

Figure 1 – Location of the Advocate Nickel Property in the Baie Verte Peninsula, Newfoundland

查看配图

Birchy North Target

As described in the Company’s October 1, 2026 news release, eight diamond drill holes totaling over 2,400 metres were completed at the Birchy North Target testing an area of 1,250 metres by up to 600 metres. Results have been received from the first four holes drilled and are summarized in table 1 and figures 2 and 3.

The first four holes, drilled along a single lateral section at Birchy North, have returned DTR nickel grades over their entire lengths that average significantly above the calculated cut-off grade of 0.06% DTR nickel at FPX’s Baptiste Deposit in British Columbia (Indicated Resource of 1,815 Mt @ 0.129% DTR nickel using a 0.06% cut-off; see the company’s November 14, 2022 press release).

Holes B26-001, B26-002 and B26-004 define a high-grade awaruite nickel core approximately 350 m wide by 300 m deep with DTR nickel grades generally in excess of 0.10% (see Figure 3). This high-grade core remains open to the northwest. Within this high-grade core, hole B26-004 intersected a near-surface very high-grade interval of 54 m at 0.14% DTR nickel from only 29 m depth.

Holes B26-005 through B26-008 test the Birchy North Target along 1,250 m of strike length and show visible awaruite mineralization across significant intervals in all holes. DTR nickel assay results are expected to be received in the coming weeks.

Table 1 – Birchy North Drill Hole Results

Figure 2 – Birchy North Plan Map

查看配图

Figure 3 – Birchy North Cross Section A – A’, Holes B26-001 to B26-004

查看配图

Note: This vertical cross section through holes B26-001 to B26-004 shows a view looking towards the northeast.

Table 2 – Birchy North Drill Hole Details

Wolverine Target

Drilling continues at the Wolverine Target, located approximately 24 km northeast of the Birchy North Target. Based on positive visual interpretation of awaruite abundance in the initial holes, the planned program at Wolverine has been expanded to include up to nine drill holes totaling approximately 2,800 metres. As shown in figure 4, planned drilling will now cover a strike length of approximately 1.8 km. Assays for all completed drill holes at Wolverine are pending.

Figure 4 – Wolverine Drilling Plan Map

查看配图

Table 3 – Wolverine Drill Hole Details

Note 1: the final location and orientation of planned drill holes may differ materially from the current plan as shown.

Note 2: Hole W26-004 was terminated after only 11 metres due to drilling difficulties. Hole W26-005 was re-drilled in approximately the same location and was successful in achieving the targeted depth. Hole W26-004 is not counted in the planned or completed drill hole count.  

Total Nickel Values and Davis Tube Recoverable Nickel

Total nickel values in ultramafic rock samples from drilling at the Birchy North Target range from 0.18% to 0.25%. These values are consistent with typical background nickel values from ultramafic rocks sampled globally and do not represent potentially recoverable nickel. The high DTR nickel values reported indicate that the nickel in these target areas is primarily contained in awaruite with grain sizes sufficiently coarse to be recovered by magnetic separation.

Option Agreement and FPX-JOGMEC Joint Venture

As announced in the Company’s September 23, 2025 news release, FPX has signed an option agreement (the “Agreement”) with Shoreline Exploration Inc. to acquire up to 100% of the Advocate Nickel Property.

JOGMEC has accepted the Advocate Nickel Property as a “Designated Property” within the broader FPX-JOGMEC Generative Alliance. JOGMEC has the ability to obtain a 60% interest in Advocate and has funded 60% of project expenditures to-date; FPX holds the remaining 40% interest in Advocate and has funded 40% of project expenditures to-date.

Sampling and Analytical Method

Diamond drill core samples were collected under the supervision of Mercator Geological Services staff. Drill core was transported from the drill site to the logging facility in Baie Verte where it was logged, photographed, and split in half by diamond saw prior to being sampled. Samples were then bagged, and awaruite-specific reference materials inserted at regular intervals. Approximately 10% of the sample stream is comprised of QA/QC samples including certified reference materials and duplicates. Samples were grouped and batches shipped to Activation Laboratories (“Actlabs”) in Ancaster, Ontario.

Sample preparation by Actlabs involved crushing the entire sample to 80% less than 2 mm, riffle splitting 250 g, and pulverization of the split to greater than 95% passing 74 microns. Analytical procedures included whole rock analysis by lithium metaborate/tetraborate fusion ICPOES, Davis Tube magnetic separation, and lithium borate fusion XRF analysis on the magnetic separate. The DTR nickel grade is calculated by multiplying the magnetic separate XRF fusion nickel value by the weight of the magnetic fraction, divided by total DTR sample weight. All QA/QC data was reviewed and found to be within acceptable limits. The DTR method is a bench scale metallurgical test procedure and is used to provide a measure of magnetically recoverable nickel and is the global, industry standard for geometallurgical testing for magnetic recovery operations and exploration projects.

Reported drill hole lengths are drill intersections and not necessarily true widths. Estimated true widths are shown in Figure 3.

Qualified Person

Keith Patterson, P.Geo., FPX’s Vice President, Exploration, FPX’s Qualified Person under NI 43-101, has reviewed and approved the scientific and technical content of this news release.

Stock Option Grant

FPX has granted 250,000 stock options to an employee of the company. The stock options have an exercise price of $0.30 per share and will expire on November 6, 2031.

About FPX Nickel Corp.

FPX Nickel Corp.  is focused on the exploration and development of the Baptiste Nickel Project, located in central British Columbia, and other occurrences of the same unique style of naturally occurring nickel-iron alloy mineralization known as awaruite.  For more information, please view the Company’s website at https://fpxnickel.com/ or contact Martin Turenne, President and CEO, at (604) 681-8600 or ceo@fpxnickel.com.

On behalf of FPX Nickel Corp.

“Martin Turenne”

Martin Turenne, President, CEO and Director

Forward-Looking Statements

Certain of the statements made and information contained herein is considered “forward-looking information” within the meaning of applicable Canadian securities laws. These statements address future events and conditions and so involve inherent risks and uncertainties, as disclosed in the Company’s periodic filings with Canadian securities regulators. Actual results could differ from those currently projected. The Company does not assume the obligation to update any forward-looking statement.

Neither the TSX Venture Exchange nor its Regulation Services Provider accepts responsibility for the adequacy or accuracy of this release.

The post FPX Nickel Defines Significant Near-Surface High-Grade Awaruite Nickel Zone in First Drill Holes at Advocate Nickel Property in Newfoundland; Expands Drill Program to Over 5,000 Metres appeared first on FPX Nickel.